 |
 |
 |
 |
 |
|
|
|
|
|
High Quality Parts from CAS4
ENGINE
CRANK SHAFT
FLYWHEELS & RODS
NOTE: WE SELL MORE THAN LISTED
HERE -
CALL US - 845-786-0620
FOR ALL S&S
CYCLE PARTS -
PRICES SHOULD NOT BE LISTED -
AS PER SS CYCLE MANUFACTURING -
PLEASE CALL FOR ALL SS CYCLE PARTS PRICES -
I STRONGLY SUGGEST YOU CALL AND CHECK CURRENT $$ BEFORE ORDERING !!
 |
MOTOR FACTORY®
CRANK SHAFT ASSEMBLIES FOR BIG
TWINS SPORTSTERS® Stock replacement crank shaft assemblies come complete with rods and shaft fully assembled and balanced for stock cast pistons. |
CRANK SHAFTS FOR BIG TWINS
| Part # |  Description |
List Price | Your Price |
| CS020730 | CRANK SHAFT ASSEMBLY Fits all models 1978-1986. BIG TWINS | $799.95 | $719.95 |
| CS020731 | CRANK SHAFT ASSEMBLY Fits all models 1987-1989. BIG TWINS | $749.95 | $675.95 |
| CS020733 | CRANK SHAFT ASSEMBLY Fits all models 1993-up (except fuel injection). BIG TWINS | $749.95 | $675.95 |
CRANK SHAFTS FOR SPORTSTER®
| Part # | Description |
List Price | Your Price |
| CS020740 | CRANK SHAFT ASSEMBLY Fits all models 1977-1985. SPORTSTER® | $679.95 | $609.95 |
 |
S & S 89" STROKER
KIT FOR EVOLUTION® BIG TWINS The S & S 89" stroker kit is designed with maximum potential engine life and performance in mind. Each component is engineered with the strongest possible construction available. Design features include:
Available for Evolution® Big Twins 1984-up, each kit includes flywheel assembly with rods and shafts (balanced, trued, and ready to Install), +.005" oversized pistons with rings, wrist pins and retainers and instructions. |
| Part # | Description |
List Price | Your Price |
| CS020700 | S & S 89" STROKER KIT Fits Big Twins Evolution® engines 1984-1989 | CALL | CALL |
| CS020701 | S & S 89" STROKER KIT Fits Big Twins Evolution® engines1990-up | CALL | CALL |
 |
S & S CRANK SHAFTS ASSEMBLIES Engineered with the strongest possible materials and construction methods available. Available in 4-1/4" (stock) or 4-5/8" strokes, each S & S crank shaft is factory assembled and comes complete with heavy duty rods, pinion shaft and sprocket shaft fully assembled, ready to install. Flywheels only are also available for stock replacement. |
4-1 /4" (STOCK) STROKE CRANK SHAFT
| Part # | Description |
List Price | Your Price |
| CS020703 | S & S Crankshaft assembly. Fits 80" Big Twins late 1984-1989 Will fit 1973-1984 if .001" oversized wrist pin is used | CALL | CALL |
| CS020702 | S & S Flywheels only. Fits 80" Big Twins late 1981-1989 4-5/8" | CALL | CALL |
STROKER CRANK SHAFT
| Part # | Description |
List Price | Your Price |
| CS020705 | S & S 4 5/8" Crankshaft assembly. Fits Big Twins late 1984-1989.Will fit 1973-1984 if .001" oversized wrist pin is used | CALL | CALL |
| CS020706 | S & S 4 5/8" Flywheels only. Fits Big Twins late 1981-1989 | CALL | CALL |
S & S HEAVY DUTY CONNECTING
RODS
These connecting rods have been designed as heavy duty replacements for stock or modified
Harley Davidson® engines. Each set comes complete with crank pin,bearings, bearing
retainers, nuts, and piston pin bushings. Ready to install.Design features include: Drop
forged from 4140 chrome moly steel Harder than stock heat treatment specifications
Additional rod to rod clearance to accommodate strokes up to 5" 7.440"
center to center length
FOR BIG TWINS
| Part # | Description |
List Price | Your Price |
| CS020105 | s & S HEAVY DUTY CONNECTING ROD Fits Big Twin models 1941-early 1981 | CALL | CALL |
| CS020106 | s & S HEAVY DUTY CONNECTING ROD Fits Big Twin models late 1981-up with .792" wrist pin | CALL | CALL |
FOR SPORTSTERS®
| Part # | Description |
List Price | Your Price |
| CS020103 | s & S HEAVY DUTY CONNECTING ROD Fits XL models 1957-early 1981 | CALL | CALL |
| CS020104 | s & S HEAVY DUTY CONNECTING ROD Fits XL models 1981-1985 | CALL | CALL |
 |
Connecting Rod Assemblies Ready to install, complete with crank pin, crank pin nuts, piston pin bushings and rod rollers with aluminum retainers. |
For Big Twin Models
| Part # | Description |
List Price | Your Price |
| CC20327 | Big Twin Connecting Rod Assembly1984 to present (repl.OEM 24281-83). | $234.95 | $209.95 |
| CC20326 | Big Twin Connecting Rod Assembly1981-early 1983 (repl. OEM 24281-80).Evolution'-style rod | $234.95 | $209.95 |
| CC20325 | Big Twin Connecting Rod Assembly1974-early 1981 (repl, OEM 24281-74A) | $234.95 | $209.95 |
| CC20324 | Big Twin Connecting Rod Assembly1941 thru 1973 (repl OEM 24281-41A). | $234.95 | $209.95 |
For Sportster® Models
| Part # | Description |
List Price | Your Price |
| CC20330 | Connecting Rod Assembly For Sportster® Models1986 to present (repl OEM 24275-86A) | $234.95 | $209.95 |
| CC20329 | Connecting Rod Assembly For Sportster® Models1981 thru 1985 (repl OEM 24275-80A) | $234.95 | $209.95 |
| CC20328 | Connecting Rod Assembly For Sportster® Models1957 thru 1980 (repl OEM 24275-57) | $234.95 | $209.95 |
Engine Roller Bearings
American-made rollers. Sold in re-sealable bags of 100.
Short Rod Rollers
For 1952 K-models and OHV Big Twins 1951 thru 1972 (36 used)
| Part # | Description |
List Price | Your Price |
| CC49000 | Short Rod Rollers Size.1875 x.329 Std. OEM 9101A bag of 100. | $16.95 | $15.95 |
| CC49001 | Short Rod Rollers Std.Size +.0002 OEM 9102A bag of 100. | $16.95 | $15.95 |
| CC49002 | Short Rod Rollers Std.Size +.0004 OEM 9103A bag of 100. | $16.95 | $15.95 |
| CC49005 | Short Rod Rollers Std.Size +.001 OEM 9106A bag of 100. | $16.95 | $15.95 |
For Sportster® and KH models
1954 early 1986 and Big Twins 1973 thru 1986 (34 used)
| Part # | Description |
List Price | Your Price |
| CC49025 | Short Rod Rollers Size.1875 x .294 Std.OEM9441A bag of 100. 1954 early 1986 and Big Twins 1973 thru 1986 (34 used) | $18.95 | $16.95 |
| CC49026 | Short Rod Rollers Std.Size +.0002 OEM 9442A bag of 100. 1954 early 1986 and Big Twins 1973 thru 1986 (34 used) | $18.95 | $16.95 |
| CC49027 | Short Rod Rollers Std.Size +.0004 OEM 9443A bag of 100. 1954 early 1986 and Big Twins 1973 thru 1986 (34 used) | $18.95 | $16.95 |
| CC49028 | Short Rod Rollers Std.Size +.0006 OEM 9444A bag of 100. 1954 early 1986 and Big Twins 1973 thru 1986 (34 used) | $18.95 | $16.95 |
| CC49029 | Short Rod Rollers Std.Size +.0008 OEM 9445A bag of 100. 1954 early 1986 and Big Twins 1973 thru 1986 (34 used) | $18.95 | $16.95 |
| CC49030 | Short Rod Rollers Std.Size +.001 OEM 9446A bag of 100. 1954 early 1986 and Big Twins 1973 thru 1986 (34 used) | $18.95 | $16.95 |
| CC49031 | Short Rod Rollers Std.Size +.002 OEM 9418 bag of 100. 1954 early 1986 and Big Twins 1973 thru 1986 (34 used) | $18.95 | $16.95 |
| CC49032 | Short Rod Rollers Std.Size +.003 bag of 100. 1954 early 1986 and Big Twins 1973 thru 1986 (34 used) | $18.95 | $16.95 |
| CC49033 | Short Rod Rollers Std.Size -.0002 OEM 9450A bags of 100. 1954 early 1986 and Big Twins 1973 thru 1986 (34 used) | $18.95 | $16.95 |
Long Rod Rollers
For Big Twins 1973-1986 (17 used)
| Part # | Description |
List Price | Your Price |
| CC49016 | Long Rod Rollers .1875 x .585 Std.OEM 9186 bag of 100. For Big Twins 1973-1986 (17 used) | $16.95 | $15.95 |
| CC49017 | Long Rod Rollers Std.Size +.0002 OEM 9180 bag of 100. For Big Twins 1973-1986 (17 used) | $16.95 | $15.95 |
| CC49018 | Long Rod Rollers Std.Size +.0004 OEM 9181 bag of 100. For Big Twins 1973-1986 (17 used) | $16.95 | $15.95 |
| CC49019 | Long Rod Rollers Std.Size +.0006 OEM 9182 bag of 100. For Big Twins 1973-1986 (17 used) | $16.95 | $15.95 |
| CC49020 | Long Rod Rollers Std.Size +.0008 OEM 9183 bag of 100. For Big Twins 1973-1986 (17 used) | $16.95 | $15.95 |
| CC49021 | Long Rod Rollers Std.Size +.001 OEM 9184 bag of 100. For Big Twins 1973-1986 (17 used) | $16.95 | $15.95 |
| CC49022 | Long Rod Rollers Std.Size +.002 bag of 100. For Big Twins 1973-1986 (17 used) | $16.95 | $15.95 |
 |
JIMS Crank Pin Kits These crank pins feature a 16 micron finish or better on the flywheel shafts and all diameters ground concentric to at least .0003". Each kit includes a precision American made 2- or 3-hole crank pin, two crank pin nuts and a woodruff key. |
2-Hole Crank Pin Kits
| Part # | Description |
List Price | Your Price |
| CC20778 | JIMS 2-Hole Crank Pin Kit For Big Twins 1941-early 1981 (has late1 "-20 threads) repl. OEM 23961-41 | $84.95 | $76.95 |
| CC20779 | JIMS 2-Hole Crank Pin Kit For Big Twins late 1981 to present (repl. OEM 23961-80A) | $84.95 | $76.95 |
3-Hole Crank Pin Kits
| Part # | Description |
List Price | Your Price |
| CC20777 | JIMS 3-Hole Crank Pin Kit For Big Twins 1941-early 1981(repl. OEM 23961-41) | $84.95 | $76.95 |
| CC20780 | JIMS 3-Hole Crank Pin Kit For Big Twins late 1981 to present(repl. OEM 23961-80A) | $84.95 | $76.95 |
Note: Pre-1956 motors should be checked for
nut-to crank case clearance when installing.
ENGINE SHAFTS FOR BIG TWINS AND SPORTSTERS®
MOTOR FACTORY® AMERICAN MADE ENGINE SHAFTS
These quality American made crank pins and flywheel shafts are made from a premium
aerospace approved chromium nickel molybdenum alloy with state of the art computerized
manufacturing equipment. This alloy is vacuum degassed to ensure meeting the magnetic
particle standards of ASM2301 making it the most durable alloy available to insure long
lasting performance. The crank pins feature a new oiling design, 180 degrees apart, for
more complete lubrication on bearing diameter. Made in the USA.
ACCEL "SUPER SHAFT" ENGINE SHAFTS
Accel's line of severe service crank pins and flywheel shafts feature:
These Accel "Super Shafts" come individually packaged in a protective display box for maximum shelf life. Warranty details are packaged with each shaft.Limited factory direct replacement life time warranty. Made in the USA.
SPROCKET SHAFTS
| Part # | Description |
List Price | Your Price |
| CS020145 | MOTOR FACTORY® SPROCKET SHAFT Fits Big Twins 1956-1964.Replaces OEM 24001-56 | $57.95 | $51.95 |
| CS020146 | MOTOR FACTORY® SPROCKET SHAFT Fits Big Twins 1965-1969. Replaces OEM 24001-65 | $57.95 | $51.95 |
| CS020147 | MOTOR FACTORY® SPROCKET SHAFT Fits Big Twins 1970-1971. Replaces OEM 24001-70 | $61.95 | $55.95 |
| CS020148 | MOTOR FACTORY® SPROCKET SHAFT Fits Big Twins 1972-early 1981. Replaces OEM 24001 -72 | $61.95 | $55.95 |
| CS020229 | MOTOR FACTORY® SPROCKET SHAFT Fits Big Twins late 1981-1985. Replaces OEM 23909-80 | $58.95 | $52.95 |
| CS020149 | MOTOR FACTORY® SPROCKET SHAFT Fits XL models 1957-1976. Replaces OEM 24000-57 | $56.95 | $50.95 |
| CS020150 | MOTOR FACTORY® SPROCKET SHAFT Fits XL models 1977-early 1981. Replaces OEM 24000-75 | $56.95 | $50.95 |
| CS020151 | MOTOR FACTORY® SPROCKET SHAFT Fits XL models late 1981-1985. Replaces OEM 24000-80 | $81.95 | $73.95 |
ACCEL SPROCKET SHAFTS
| Part # | Description |
List Price | Your Price |
| CS020327 | ACCEL SPROCKET SHAFT Fits Big Twins 1972-early 1981. Replaces OEM 24001 -72 | $86.95 | $79.95 |
| CS020328 | ACCEL SPROCKET SHAFT Fits Big Twins late 1981-1985. Replaces OEM 23909-80 | $88.95 | $79.95 |
| CS020324 | ACCEL SPROCKET SHAFT Fits XL models 1957-1976. Replaces OEM 24000-57 | $83.95 | $74.95 |
| CS020325 | ACCEL SPROCKET SHAFT Fits XL models 1977-early 1981. Replaces OEM 24000-75 | $83.95 | $74.95 |
PINION SHAFTS
| Part # | Description |
List Price | Your Price |
| CS020225 | MOTOR FACTORY® PINION SHAFT Fits Big Twins 1958-1972. Replaces OEM 24006-58 | $58.95 | $52.95 |
| CS020226 | MOTOR FACTORY® PINION SHAFT Fits Big Twins 1973-early 1981. Replaces OEM 24006-73 | $56.95 | $50.95 |
| CS020227 | MOTOR FACTORY® PINION SHAFT Fits Big Twins late 1981-1986. Replaces OEM 24006-80 and 24006-83 | $65.95 | $59.95 |
| CS020228 | MOTOR FACTORY® PINION SHAFT Fits Big Twins 1987-1989. Replaces OEM 24006-87 | $61.95 | $55.95 |
| VT108330 | JIMS® PINION SHAFT Fits XL models 1957-1976. Replaces OEM 24005-57 | $95.95 | $85.95 |
| VT100404 | EASTERN® PINION SHAFT Fits XL models 1957-1976. Replaces OEM 24005-57 | $79.95 | $73.95 |
| CS020223 | MOTOR FACTORY® PINION SHAFT Fits XL models 1977-early 1981 .Replaces OEM 24005-57 | $84.95 | $75.95 |
| CS020224 | MOTOR FACTORY® PINION SHAFT Fits XL models late 1981-1985. Replaces OEM24005-80 | $82.95 | $74.95 |
ACCEL PINION SHAFTS
| Part # | Description |
List Price | Your Price |
| CS020305 | ACCEL PINION SHAFT Fits Big Twins 1958-1972. Replaces OEM 24006-58 | $91.95 | $82.95 |
| CS020306 | ACCEL PINION SHAFT Fits Big Twins 1973-early 1981. Replaces OEM 24006-73 | $99.95 | $89.95 |
| CS020307 | ACCEL PINION SHAFT Fits Big Twins late 1981-1986. Replaces OEM 24006-80 and 24006-83 | $106.95 | $95.95 |
| CS020300 | ACCEL PINION SHAFT Fits XL models 1957-1976. Replaces OEM 24005-57 | $88.95 | $79.95 |
| CS020301 | ACCEL PINION SHAFT Fits XL models 1977-early 1981 .Replaces OEM 24005-57 | $104.95 | $94.95 |
| CS020302 | ACCEL PINION SHAFT Fits XL models late 1981-1985. Replaces OEM24005-80 | $104.95 | $94.95 |
MOTOR FACTORY® CRANK PINS
| Part # | Description |
List Price | Your Price |
| CS020201 | MOTOR FACTORY® CRANK PIN Fits Big Twins 1941 -early 1981. Replaces OEM 23961-41 | CALL | |
| CS020202 | MOTOR FACTORY® CRANK PIN Fits Big Twins late 1981-up. Replaces OEM 23961-80A | ||
| CS020206 | MOTOR FACTORY® CRANK PIN Fits XL models 1954-early 1981. Replaces OEM 23960-54 | ||
| CS020207 | MOTOR FACTORY® CRANK PIN Fits XL models late 1981-up. Replaces OEM 23960-80A |
ACCEL CRANK PINS
| Part # | Description |
List Price | Your Price |
| CS020143 | ACCEL CRANK PIN Fits Big Twins 1941 -early 1981. Replaces OEM 23961-41 | $83.95 | $75.95 |
| CS020144 | ACCEL CRANK PIN Fits Big Twins late 1981-up. Replaces OEM 23961-80A | $83.95 | $75.95 |
| CS020140 | ACCEL CRANK PIN Fits XL models 1954-early 1981. Replaces OEM 23960-54 | $71.95 | $64.95 |
| CS020141 | ACCEL CRANK PIN Fits XL models late 1981-up. Replaces OEM 23960-80A | $81.95 | $73.95 |
JIMS Pinion Shaft Kits
American-made replacements for the Original Equipment pieces. Each kit includes the shaft,
nuts, keys, washers, and retaining rings.
| Part # | Description |
List Price | Your Price |
| CC20782 | JIMS Pinion Shaft Kit For Big Twins 1973-early 1981(repl. OEM 24006-73) | $89.95 | $80.95 |
| CC20783 | JIMS Pinion Shaft Kit For Big Twins late 1981-early 1986(repl. OEMs 24006-80, 24006-83).Also for aftermarket flywheels with common-taper design | $89.95 | $80.95 |
JIMS Crankshaft Nuts
American-made replacements for the Original Equipment pieces. Face-ground to a 32 surface
finish that is square to the threads within .0005"
Sold each.
Crank Pin Nut
| Part # | Description |
List Price | Your Price |
| CC20270 | JIMS Crank Pin Nut 1 "-20 threads For Big Twin models late 1983 to present Repl. OEM 23969-83 | 26.95 | $23.95 |
Pinion Gear Shaft Nuts
| Part # | Description |
List Price | Your Price |
| CC20271 | JIMS Pinion Gear Shaft Nut 3/4"-20 threads For Big Twin models late 1981 thru 1989 Repl. OEM 24016-80 | $10.95 | $9.95 |
| CC20645 | JIMS Pinion Gear Shaft Nut. 5/8--24 left hand threads For Big Twin models 1954 thru 1989 Repl. OEM 24023-54 | $6.95 | $5.95 |
Sprocket Shaft Nut
| Part # | Description |
List Price | Your Price |
| CC20272 | JIMS Sprocket Shaft Nut 1 1/8"-16 threads For Big Twin models 1972-early 1985. Repl. OEM 24017-80 | $13.95 | $12.95 |
Pinion and Sprocket Shaft Nut.
| Part # | Description |
List Price | Your Price |
| CC20273 | JIMS Pinion and Sprocket Shaft Nut 3/4-18 threads For Big Twin models 1930-early 1981 Repl. OEM 24023-36 | $14.95 | $13.95 |
JIMS Pinion Gears for Big Twins
A wide selection of pinion gears for all Big Twins models 1954 thru 1989. Sold each.
1954-Early 1977 Models
All measurements are taken over .105" gauge pins
| Part # | Description |
List Price | Your Price |
| CC20786 | JIMS 1954-Early 1977 Pinion Gear Orange (measures 1.4490-1.4485) | $74.95 | $66.95 |
| CC20787 | JIMS 1954-Early 1977 Pinion Gear Black (measures 1.4485-1.4480) | $74.95 | $66.95 |
| CC20788 | JIMS 1954-Early 1977 Pinion Gear Red (measures 1.4480-1.4475) | $74.95 | $66.95 |
| CC20789 | JIMS 1954-Early 1977 Pinion Gear Blue (measures 1.4475-1.4470) | $74.95 | $66.95 |
| CC20790 | JIMS 1954-Early 1977 Pinion Gear Green (measures 1.4470-1.4465) | $74.95 | $66.95 |
| CC20791 | JIMS 1954-Early 1977 Pinion Gear White (measures 1.4465-1.4460) | $74.95 | $66.95 |
| CC20792 | JIMS 1954-Early 1977 Pinion Gear Brown (measures 1.4460-1.4455) | $74.95 | $66.95 |
| CC20793 | JIMS 1954-Early 1977 Pinion Gear Yellow (measures 1.4455-1.4450) | $74.95 | $66.95 |
Late 1977 thru 1989 Models
All measurements are taken over .105" gauge pins
| Part # | Description |
List Price | Your Price |
| CC20794 | JIMS Late 1977 thru 1989 Pinion Gear Orange (measures 1.4756-1.4751)repl. OEM 24040-78 | $65.95 | $59.95 |
| CC20795 | JIMS Late 1977 thru 1989 Pinion Gear White (measures 1.4751-1.4745)repl. OEM 24041-78 | $68.95 | $61.95 |
| CC20796 | JIMS Late 1977 thru 1989 Pinion Gear Yellow (measures 1.4745-1.4737)repl. OEM 24042-78 | $68.95 | $61.95 |
| CC20797 | JIMS Late 1977 thru 1989 Pinion Gear Red (measures 1.4737-1.4729)repl. OEM 24043-78 | $68.95 | $61.95 |
| CC20798 | JIMS Late 1977 thru 1989 Pinion Gear Blue (measures 1.4729-1.4721)repl. OEM 24044-78 | $68.95 | $61.95 |
| CC20799 | JIMS Late 1977 thru 1989 Pinion Gear Green (measures 1.4721-1.4715)repl. OEM 24045-78 | $68.95 | $61.95 |
| CC20800 | JIMS Late 1977 thru 1989 Pinion Gear Black (measures 1.4715-1.4710) repl. OEM 24046-78 | $68.95 | $61.95 |
A. Upper Rod Bushings
| Part # | Description |
List Price | Your Price |
| CC25273 | Upper Rod Bushing .002 oversize. For Big Twin models1936 to present (repl. OEM 24334-36)sold each | $7.95 | $6.95 |
| CC25608 | Upper Rod Bushing Standard. For Sportster® and K models1952 to present (repl. OEM 24331-36)sold each | $6.95 | $5.95 |
B. Connecting Rod Races
Complete set of three male and female races.
| Part # | Description |
List Price | Your Price |
| CC15928 | Connecting Rod Races For Big Twin models 1936 to present (repl. OEMs 24345-36A, 24356-36A) | $24.95 | $21.95 |
| CC15929 | Connecting Rod Races For Sportster® and K models 1952 to present (repl. OEMs 24352-52A, 24341-52A) | $24.95 | $21.95 |
| CC20636 | Connecting Rod Races JIMS races. For Big Twin models 1936 to present (repl. OEMs 24345-36A,24356-36A) | $39.95 | $35.95 |
C. Rod Rollers and Retainer Kit
| Part # | Description |
List Price | Your Price |
| CC18671 | Rod Rollers and Retainer Kit Standard. For Big Twin models 1940 thru1986 (repl, OEM 24385-40B) | $39.95 | $35.95 |
| CC18674 | Rod Rollers and Retainer Kit Standard. For Sportster® and K models 1952-early 1986 (repl. OEM 24370-52B) | $28.95 | $25.95 |
D. JIMS Crank Pins
| Part # | Description |
List Price | Your Price |
| CC20041 | JIMS Crank Pin For 1941-early 1981 Big Twin models (repl. OEM 23961-41) 3-hole crankpin | $55.95 | $49.95 |
| CC20422 | JIMS Crank Pin For Big Twins late 1983 to present (repl. OEM 23961-80A) | $56.95 | $50.95 |
| CC20603 | JIMS Crank Pin 'A Cut Above' drag bike crankpin with special heat-treating. For 1941-early1981 Big Twins (repl. OEM 23961-41) | $124.95 | $109.95 |
| CC20641 | JIMS Crank Pin 'A Cut Above' drag bike crankpin with special heat-treating. For Big Twin models late 1981 to present(repl. OEM 23961-80A) | $124.95 | $109.95 |
| CC20609 | JIMS Crank Pin 'Short' three-hole crankpin that is .025"shorter taper-to-taper for less rod endplay. For 1941-early 1981 Big Twin models | $56.95 | $50.95 |
| CC20640 | JIMS Crank Pin 'Short' three-hole crankpin that is .025"shorter taper-to-taper for less rod endplay. For late 1981-up Big Twin models | $56.95 | $50.95 |
Note: Late 1981-early 1983 motors require 1'-20 nuts(OEM 23969-83) CCI 20-270
| Part # | Description |
List Price | Your Price |
| CC20042 | JIMS Crank Pin For Sportster® and K models 1954-early1981 (repl. OEM 23960-54) 3-hole crankpin | $51.95 | $46.95 |
| CC20420 | JIMS Crank Pin For Sportster® models late 1981 to present (repl. OEM 23960-80A) | $52.95 | $47.95 |
D. Custom Chrome® Crank Pins
Pins are Rockwell tested 65 on a C-scale.
| Part # | Description |
List Price | Your Price |
| CC18670 | Custom Chrome®Crank Pin For Big Twin models 1941-early 1981 (repl. OEM 23961-41) | $45.95 | $41.95 |
| CC18676 | Custom Chrome®Crank Pin For Big Twin models late 1981-early 1983(repl. OEM 23961-80) | $53.95 | $48.95 |
| CC18673 | Custom Chrome® Crank Pin For Sportster® models 1954-early 1981 (repl. OEM 23960-54) | $53.95 | $48.95 |
Crank Pin Keys
| Part # | Description |
List Price | Your Price |
| CC20090 | Crank Pin Key For Sportster® and Big Twin models1936-early 1981 (repl. OEM 23985-18) | $0.95 | $0.50 |
| CC56307 | Crank Pin /Pinion Shaft Key For Sportster® and Big Twin models late 1981 to present (repl. OEM 11218) | $0.95 | $0.50 |
E. Crank Pin Nut Kits
Each kit includes two nuts, two locks and two screws.
| Part # | Description |
List Price | Your Price |
| CC20076 | Crank Pin Nut Kit For all Big Twin models 1936 thru 1984(except Evolution® models). Complete kit(repl. OEM 23966-78) | $16.95 | $14.95 |
| CC18672 | Crank Pin Nut Kit For all Big Twin models 1936 thru 1984(except Evolution® models). 2 nuts ONLY(repl. OEM 23966-54A) | $12.95 | $10.95 |
| CC20642 | Crank Pin Nut Kit For all Big Twin models 1954-early 1981. 2 nuts ONLY (repl. OEM23966-54A) | $26.95 | $23.95 |
| CC20077 | Crank Pin Nut Kit For all Sportster® models. Complete kit(repl. OEM 23967-79) | $14.95 | $13.95 |
| CC18675 | Crank Pin Nut Kit For all Sportster® models. 2 nuts ONLY(repl. OEM 23967-54A) | $12.95 | $10.95 |
F JIMS Sprocket Shafts
| Part # | Description |
List Price | Your Price |
| CC20025 | JIMS Sprocket Shaft For 1930 thru 1954 Big Twin models(repl. OEM 24001-30) | $41.95 | $37.95 |
| CC20071 | JIMS Sprocket Shaft For 1955 Big Twin models(repl. OEM 24001-55) | $72.95 | $65.95 |
| CC20072 | JIMS Sprocket Shaft For 1956 thru 1964 Big Twin models(repl. OEM 24001-56) | $59.95 | $53.95 |
| CC20073 | JIMS Sprocket Shaft For 1965 thru 1969 Big Twin models(repl. OEM 24001-65) | $59.95 | $53.95 |
| CC20074 | JIMS Sprocket Shaft For 1970 thru 1971 Big Twin models(repl. OEM 24001-70) | $63.95 | $57.95 |
| CC20075 | JIMS Sprocket Shaft For 1972-early 1981 Big Twin models(repl. OEM 24001-72) | $63.95 | $57.95 |
| CC20602 | JIMS Sprocket Shaft For late 1981-early 1985 Big Twin models(repl. OEM 23909-80) | $59.95 | $53.95 |
| CC20781 | JIMS Sprocket Shaft For late 1981-early 1985 Big Twin models.Complete kit includes the shaft, two nuts,and a key | $89.95 | $80.95 |
| CC20012 | JIMS Sprocket Shaft For 1929 thru 1973 45' models(repl. OEM 24000-29) | $43.95 | $39.95 |
| CC20059 | JIMS Sprocket Shaft For 1957 thru 1976 Sportster" models(repl., OEM 24000-57) | $57.95 | $51.95 |
| CC20099 | JIMS Sprocket Shaft For 1977-early 1981 Sportster® models(repl. OEM 24000-75) | $57.95 | $51.95 |
Sprocket Shaft Keys for Big Twins
| Part # | Description |
List Price | Your Price |
| CC20092 | JIMS Sprocket Shaft Keys For 1956 thru 1971 Big Twin models (repl. OEM 23985-56) pair | $1.95 | $1.50 |
G. JIMS Pinion Shafts
| Part # | Description |
List Price | Your Price |
| CC20028 | JIMS Pinion Shaft For 1939 thru 1953 Big Twin models(repl. OEM 24007-39) | $125.95 | $110.95 |
| CC20057 | JIMS Pinion Shaft For 1955 thru 1957 Big Twin models(repl. OEM 24006-55) | $125.95 | $110.95 |
| CC20060 | JIMS Pinion Shaft For 1958 thru 1972 Big Twin models(repl. OEM 24006-58) | $125.95 | $110.95 |
| CC20061 | JIMS Pinion Shaft For 1973-early 1981 Big Twin models(repl. OEM 24006-73) | $125.95 | $110.95 |
| CC20644 | JIMS Pinion Shaft For late 1981 thru 1986 Big Twin models. Metering oil screw included (repl. OEM 24006-73) | $125.95 | $110.95 |
| CC20784 | JIMS Pinion Shaft For late 1981 to present Big Twins when using 1993-up cam covers. Designed for use with aftermarket stroker flywheels.Includes metering oil screw. | $125.95 | $110.95 |
| CC20027 | JIMS Pinion Shaft For 1937 thru 1948 'side valve' Big Twin models (repl. OEM 24006-37) | $125.95 | $110.95 |
| CC20008 | JIMS Pinion Shaft For 1957 thru 1976 Sportster® models(repl. OEM 24005-57) | $125.95 | $110.95 |
Note: Late 1981-early 1983 motors require 3/4"-20 nuts (CCI 20-271or OEM 24016-80) when using CCI 20-644 or CCI 20-784.
Pinion Shaft Keys for Big Twin Models
| Part # | Description |
List Price | Your Price |
| CC20089 | JIMS Pinion Shaft Key1936-early 1981 Big Twins (repl. OEM 23985-12) | $1.95 | $1.25 |
| CC56307 | JIMS Crank Pin /Pinion Shaft Key For Sportster® and Big Twin models late 1981 to present (repl. OEM 11218) | $0.95 | $0.50 |
| CC20091 | JIMS Pinion Shaft Key 1954 thru 1990 Big Twins (repl. OEM 2398S-54) | $0.95 | $0.50 |
JIMS Left-Hand Screw for Pinion Gear Shafts
| Part # | Description |
List Price | Your Price |
| CC20007 | JIMS Left-Hand Screw for Pinion Gear Shaft Repl. OEM 24020-51 (pack of 10) | $1.95 | $1.50 |
Motor Sprocket Bearing Shims for Big Twins 1969 thru 1992
| Part # | Description |
List Price | Your Price |
| CC56368 | Big Twin Motor Sprocket Bearing Shim .0895-.0905 repl. OEM 9110 | $1.95 | $1.50 |
| CC56369 | Big Twin Motor Sprocket Bearing Shim .0915-.0925 repl. OEM 9120 | $1.95 | $1.50 |
| CC56370 | Big Twin Motor Sprocket Bearing Shim .0935-.0945 repl. OEM 9121 | $1.95 | $1.50 |
| CC56371 | Big Twin Motor Sprocket Bearing Shim .0955-.0965 repl. OEM 9122 | $1.95 | $1.50 |
| CC56372 | Big Twin Motor Sprocket Bearing Shim .0975-.0985 repl. OEM 9123 | $1.95 | $1.50 |
| CC56373 | Big Twin Motor Sprocket Bearing Shim .0995-.1005 repl. OEM 9124 | $1.95 | $1.50 |
| CC56374 | Big Twin Motor Sprocket Bearing Shim .1015-.1025 repl. OEM 9125 | $1.95 | $1.50 |
| CC56375 | Big Twin Motor Sprocket Bearing Shim .1035-.1045 repl. OEM 9126 | $1.95 | $1.50 |
| CC56376 | Big Twin Motor Sprocket Bearing Shim .1055-.1065 repl. OEM 9127 | $1.95 | $1.50 |
| CC56377 | Big Twin Motor Sprocket Bearing Shim .1075-.1085 repl. OEM 9128 | $1.95 | $1.50 |
| CC56378 | Big Twin Motor Sprocket Bearing Shim .1095-.1105 repl. OEM 9129 | $1.95 | $1.50 |
| CC56379 | Big Twin Motor Sprocket Bearing Shim .1115-.1125 repl. OEM 9130 | $1.95 | $1.50 |
| CC56380 | Big Twin Motor Sprocket Bearing Shim. 1135-.1145 repl. OEM 9131 | $1.95 | $1.50 |
| CC56381 | Big Twin Motor Sprocket Bearing Shim .1155-.1165 repl. OEM 9132 | $1.95 | $1.50 |
| CC56382 | Big Twin Motor Sprocket Bearing Shim .1175-.1185 repl. OEM 9133 | $1.95 | $1.50 |
| CC56383 | Big Twin Motor Sprocket Bearing Shim .1195-.1205 repl. OEM 9134 | $1.95 | $1.50 |
| CC56384 | Big Twin Motor Sprocket Bearing Shim assortment (pack of 16) | $24.95 | $17.50 |
Motor Sprocket Bearing Shims
for Sportster® Models 1986 to Present
| Part # | Description |
List Price | Your Price |
| CC56385 | Motor Sprocket Bearing Shim .100 Repl. OEM 9142. Fits Sportster 1986 and up | $2.50 | $1.95 |
| CC56386 | Motor Sprocket Bearing Shim .102Repl. OEM 9143. Fits Sportster 1986 and up | $2.50 | $1.95 |
| CC56387 | Motor Sprocket Bearing Shim .104 repl. OEM 9144. Fits Sportster 1986 and up | $2.50 | $1.95 |
| CC56388 | Motor Sprocket Bearing Shim .106 repl. OEM 9145. Fits Sportster 1986 and up | $2.50 | $1.95 |
| CC56389 | Motor Sprocket Bearing Shim .108 repl. OEM 9146. Fits Sportster 1986 and up | $2.50 | $1.95 |
Right Crank Bearing Washer
For Big Twins 1958 thru 1986
| Part # | Description |
List Price | Your Price |
| CC56251 | Right Crank Bearing Washer Repl. OEM 24692-58. For Big Twins 1958 thru 1986 | $3.50 | $2.95 |
Crank Pin Boss Thrust Washers
| Part # | Description |
List Price | Your Price |
| CC56366 | Crank Pin Boss Thrust Washer For Big Twins late-1970 thru 1992 and Sportster® models early-1979 thru 1986 repl. OEM 6506 | $22.95 | $19.95 |
| CC56367 | Crank Pin Boss Thrust Washer For Sportster® models .198/ to present.repl. OEM 6508 | $11.95 | $10.95 |
| CC56267 | Crank Pin Boss Thrust Washer For Sportster® models 1957 thru 1971 repl. OEM 23972-57 | $9.95 | $8.95 |
Crankcase Rollers for Big Twins
For the left case of OHV Big Twins1930 thru 1957 (24 used), and the right case 1958 thru
1986 (28 used). Also fit all early wheels.
| Part # | Description |
List Price | Your Price |
| CC49048 | Crankcase Rollers .250 x .490 5td. OEM 9220A. For Big Twins | $21.95 | $19.95 |
| CC49049 | Crankcase Rollers Std.Size +.0002 OEM 9221A. For Big Twins | $21.95 | $19.95 |
| CC49050 | Crankcase Rollers Std.Size +.0004 OEM 9222A. For Big Twins | $21.95 | $19.95 |
| CC49051 | Crankcase Rollers Std.Size +.0006 OEM 9223A. For Big Twins | $21.95 | $19.95 |
| CC49052 | Crankcase Rollers Std.Size +.0008 OEM 9224A. For Big Twins | $21.95 | $19.95 |
| CC49053 | Crankcase Rollers Std.Size +.001 OEM 9225A. For Big Twins | $21.95 | $19.95 |
| CC49054 | Crankcase Rollers Std.Size+.002. For Big Twins | $21.95 | $19.95 |
For the right case of OHV Big Twins 1936-1953, and side valve models1937-1948 (12 used)
| Part # | Description |
List Price | Your Price |
| CC49055 | Crankcase Rollers .250 x .600 5td. OEM 9261 For the right case of OHV Big Twins 1936-1953, and side valve models1937-1948 (12 used) | $35.95 | $31.95 |
| CC49056 | Crankcase Rollers +.0002 OEM 9262 For the right case of OHV Big Twins 1936-1953, and side valve models1937-1948 (12 used) | $35.95 | $31.95 |
| CC49060 | Crankcase Rollers +.001 OEM 9266 For the right case of OHV Big Twins 1936-1953, and side valve models1937-1948 (12 used) | $35.95 | $31.95 |
Right Side Crankcase Rollers forSportster® and Big Twin
Models
For 1957-1976 Sportster models and1955-1957 OHV Big Twins (13 used)
| Part # | Description |
List Price | Your Price |
| CC49042 | Right Side Crankcase Rollers. 1875 x 800 Std. OEM 9421. For 1957-1976 Sportster models and1955-1957 OHV Big Twins (13 used) | $32.95 | $29.95 |
| CC49043 | Right Side Crankcase Rollers + .0002 OEM 9422. For 1957-1976 Sportster models and1955-1957 OHV Big Twins (13 used) | $32.95 | $29.95 |
| CC49044 | Right Side Crankcase Rollers + .0004 OEM 9423. For 1957-1976 Sportster models and1955-1957 OHV Big Twins (13 used) | $32.95 | $29.95 |
| CC49045 | Right Side Crankcase Rollers + .0006 OEM 9424. For 1957-1976 Sportster models and1955-1957 OHV Big Twins (13 used) | $32.95 | $29.95 |
| CC49046 | Right Side Crankcase Rollers + .0008 OEM 9425. For 1957-1976 Sportster models and1955-1957 OHV Big Twins (13 used) | $32.95 | $29.95 |
| CC49047 | Right Side Crankcase Rollers + .001 OEM 9426. For 1957-1976 Sportster models and1955-1957 OHV Big Twins (13 used) | $32.95 | $29.95 |
If you don't see it here,
E-mail us.
We haven't had a chance to post it yet.
IMPORTANT:
We at CAS are not a representative of any motorcycle manufacturer and the
parts we sell are not necessarily recommended by any motorcycle manufacturer.
Although our replacement parts are not original factory equipment, our intention
is to provide quality replacement parts that meet or exceed standards set by the
manufacturer.
We are not an authorized Harley® dealer and in no way do we have, or intend to
imply any kind of business relationship with Harley-Davidson Motor Company® .
Our intention is to provide products that can be used on a Harley-Davidson®
motorcycle.
CAS sells officially licensed Harley-Davidson® products.
However, any products with the trademark, name, word or OEM part number
used in this catalog by CAS is intended to be as a reference only to
the usage of that particular product. None of the parts and accessories in this
catalog were manufactured by or with the permission of the Harley-Davidson®
Motor Co. The words, Electra Glide, Evolution, H-D, Harley, Harley-Davidson, Low
Glide, Road King, Roadster, Softail, Sportster, Sturgis, Super Glide, Low Rider,
and
Wide Glide are registered trademarks of Harley-Davidson® Inc., Milwaukee
Wisconsin, U.S.A. The words, Duo Glide, Dyna Glide, Fat Boy, Hydra Glide and
Bad Boy are trademarks of Harley-Davidson®, Inc., Milwaukee, Wisconsin, U.S.A.
The following model designations for Harley-Davidson® motorcycles are used in
this catalog for reference only: EL, FL, FLH, FLHR, FLHS, FLHT, FLHTC, FLHTC-I,
FLHTS, Ultra, FLHX, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLT, FLTC, FLTC Ultra,
FXB, FXD, FXDB, FXDC, FXDG, FXDL, FXDS, FXDS-Conv., FXDWG, FXE, FXEF,
FXLR, FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRSE, FXRS-Conv., FXRS-SP,
FXRT, FXS, FXSB, FXST, FXSTC, FXSTS,FXSTSB, FXWG, GE, K, KH, WL, WLA,
XL, XLCH, XLCR, XLH, XLH 883, XLH 1100, XLH 1200, XLR, XLS, XLT, XLX,
AND XR1000. All other brand names or trademarks, or registered trademarks
used in this catalog are the property of their respective holders.
Please review our terms
and conditions page Thank You