Home Orders Retail Index E-Mail

CAS4 Harley Parts LogoHARLEY PARTS
High Quality  Parts  from 
CAS4

180 WIDE TIRE
SHOVELHEAD PARTS

 

Yes you can put a 180 Tire on a factory Shovel or  Pan Style Frame.
No you say, OK here it is !! And this is what you need. NOTE: PLEASE READ terms and conditions, BEFORE ORDERING PARTS OR TAKING ON THIS PROJECT (THE LEGAL LIABILITY SH_T). 

If you have a tapered engine shaft, " some pans and early shovels" you can do this with an open primary only. But requires a bit more work. Below is a brief using a 1980 FX Shovel with a Splined engine shaft.

 
Using both these kits together 
will get you a 180 on your bike.
This sprocket kit alone will
get you a 160 on you Bike
This transmission offset kit alone
will get you a 160 on your bike

These are the parts that you need - 
1: 17 x 5.75 wheel
2: 17 x 180 x 55 Tire
3: Primary offset kit -  chain or belt will work.
4: Offset Chain sprocket - required with enclosed primary.
5: Someone to extend your swingarm 1".
6: A fender and struts or a strut-less fender as seen here.
7: Standard 120 link " NON-O-ring " chain.
8: Axle spacers as needed. 
9: Rear disk brake style swingarm, this may be a good time to convert to a disk from drum.

If you want to stick w/ a enclosed primary, you need to offset the primary by .25" and install a .25" offset transmission drive sprocket. Thus the .5" total will clear a 180. If you are running an open primary, you can achieve the .5" offset the belt kit. Call for details about open primary options. 

180MM X 17 - 130MM X 16 WE DO NOT MAKE OR SELL
SWINGARMS - FIND A FABRICATOR
OR MACHINE SHOP.

A 180 x 17 wheel / tire combo is about .75" shorter than a O.E.M. 16" wheel / tire combo. If you try to run a 16 or 18 wheel you may have clearance problems at the front of the swingarm.

You have 2 options about seat / fender height:
1: move the shock mounts on the swingarm back
2:Use 1" lower shocks ( as seen above in this project ).

Estimated Price: Job # CAS4 -11305
1: Transmission Offset Kit                   $195.00
2: Offset Trans Sprocket $35.00
3: Primary Gasket Set $25.00
4: Primary O-rings $2.00
5: Standard HD Chain $49.00
6: Axle Spacers $25.00
7: Rear Sprocket Spacer  $30.00
8: Solid Polished 17 x 5.75 wheel $550.00
9: 17 x 180 x 55 Tire $159.00
Basic Package  - Parts Total  $1070.00
OPTIONS
10" to 11.5" GMA Rear Caliper Kit $285.00
Rear side mount plate w/ light $110.00
Lepera Seat - Fitment Mods Required $195.00
Slim Jim Fender - Longer = ^ $ $500.00
11" Shocks $95.00
Chrome Axle Adjusters $35.00
Stainless Steel Swingarm Axle Plates $11.00
Basic Package W/ Options above - Parts Price $2301.00
Custom Design RC Comp Wheel - Add $100 $100.00
Miss Fluids and hardware $20.00
Total Parts Price on above bike  $2421.00

Give us a call if you want to order the parts to do this. 

845-786-0620
 

CLICK HERE TO SEE ANOTHER WIDE
180 TIRE SHOVEL- 90% COMPLETED
USING THIS METHOD & PARTS.

 

 

Email
If you don't see it here, E-mail us.
We haven't had a chance to post it yet.

IMPORTANT:  

We at CAS are not a representative of any motorcycle manufacturer and the
parts we sell are not necessarily recommended by any motorcycle manufacturer.

Although our replacement parts are not original factory equipment, our intention
is to provide quality replacement parts that meet or exceed standards set by the
manufacturer.

We are not an authorized Harley® dealer and in no way do we have, or intend to
imply any kind of business relationship with Harley-Davidson Motor Company® .

Our intention is to provide products that can be used on a Harley-Davidson® 
motorcycle.   

CAS sells officially licensed Harley-Davidson®
products. 
However, any products with the trademark, name, word or OEM part number
used in this catalog by CAS is intended to be as a reference only to
the usage of that particular product. None of the parts and accessories in this
catalog were manufactured by or with the permission of the Harley-Davidson®
Motor Co. The words, TC88, Electra Glide, Evolution, H-D, Harley, Harley-Davidson, Low
Glide, Road King, Roadster, Softail, Sportster, Sturgis, Super Glide, Low Rider, and
Wide Glide are registered trademarks of Harley-Davidson® Inc., Milwaukee
Wisconsin, U.S.A. The words, VROD, V-ROD, Duo Glide, Dyna Glide, Fat Boy, Hydra Glide
and Bad Boy are trademarks of Harley-Davidson®, Inc., Milwaukee, Wisconsin, U.S.A. 
The following model designations for Harley-Davidson® motorcycles are used in 
this catalog for reference only: EL, FL, FLH, FLHR, FLHS, FLHT, FLHTC, FLHTC-I, 
FLHTS, Ultra, FLHX, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLT, FLTC, FLTC Ultra, 
FXB, FXD, FXDB, FXDC, FXDG, FXDL, FXDS, FXDS-Conv., FXDWG, FXE, FXEF,  
FXLR, FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRSE, FXRS-Conv., FXRS-SP,  
FXRT, FXS, FXSB, FXST, FXSTC, FXSTD, FXSTS,FXSTSB, FXWG, GE, K, KH, WL, WLA, 
XL, XLCH, XLCR, XLH, XLH 883, XLH 1100, XLH 1200, XLR, XLS, XLT, XLX and
XR1000.  Buell, S1, S2, M2, Cyclone, Lighting, Thunderbolt, X1. All other brand names
or trademarks, or registered trademarks used in this catalog are the property of their
respective holders.

Please review our
terms and conditions page Thank You