
High Quality Parts from CAS4
AXLES
& AXLE ADJUSTERS
This page also has related hardware.
![]()
|
'Bullet' Stainless Axle Accessories for
Softail® Models Highly polished stainless looks as good as chrome without the brittleness that causes nicks and chips. Absolutely top-quality aircraft-grade stainless is used to make both practical and attractive dress-up accessories.
|


'Flush' Mount Front Axles

Chrome-Plated Front Axles
The greatest selection of chrome axles in the industry. Complete assemblies for models as
far back as 1936. Fully-chromed, including the hardware. Axle shafts are machined from
heat-treated chrome moly steel, triple-step chrome-plated, then machine-polished and
ground to a finish size tolerance of: ±.0005". Axles are available individually or
packaged complete with a fully-chromed hardware kit. Photo shows contents of hardware and
axle kits as well as the basic axle profile.
Axle Only
Hardware Only
Hardware and Axle Kit

Chrome-Plated Rear Axles
The greatest selection of chrome axles in the industry. Complete assemblies for models as
far back as 1936. Fully-chromed, including the hardware. Axle shafts are machined from
heat-treated chrome moly steel, triple-step chrome-plated, then machine-polished and
ground to a finish size tolerance of ±.0005". The rear axle nuts are attached to the
shaft with a full-penetration weld, then machined smooth before final machine-polishing
and plating. Axles are available individually or packaged complete with a fully-chromed
hardware kit. Photo shows contents of hardware and axle kits as well as the basic axle
profile.
Axle Only
Hardware Only
Hardware and Axle Kit

Colony Chrome Axle Nut and Lock Kits
Replacement axle nut and lock kits for early Big Twin models.
| Part # | List Price | Your Price | |
| CC36098 | Colony Chrome Axle Nut and Lock Kits Rear 1930 thru 1972 | $24.95 | $21.95 |
| CC36099 | Colony Chrome Axle Nut and Lock Kits Front 1930 thru 1971 | $13.95 | $11.95 |

Custom Rear Axle Adjusters for FXR Models
These chrome rear axle adjusters with their unique design finish off any FXR
swingarm. They feature chrome die-cast aluminum end caps and forged steel axle carriers
which help to prevent distortion of the swingarm caused by over-tightening of the axle
nut. Sold in pairs.
| Part # | List Price | Your Price | |
| CC31113 | Custom Rear Axle Adjuster Sold in pairs Fit all FXR models from 1982 thru 1994 | $54.95 | $49.95 |


CCI 'Pyramid' Axle Adjuster
Forged steel axle carriers are machined to close tolerances to be a snug fit inside the
swingarm section eliminating the common problem of swingarm distortion when axle nuts are
over tightened. The chrome end caps are made of die-cast aluminum and the
chrome-steel nuts have a long shank tapped to permit a full range of axle adjustment. They
fit all CCI chrome 4-speed swing-arms as well as stock swing-arms on Sportster® models
from 1979 to present and 1973 thru 1986 4-speed FL and FX models. They also fit 1986
Softail® models. Sold in pairs complete with instructions.
| Part # | List Price | Your Price | |
| CC31112 | CCI 'Pyramid' Axle Adjuster Sold in pairs Replaces OEM 41532-89 | $39.95 | $35.95 |

Custom Axle Adjuster Covers for Dyna Glide® Models
CNC-machined chrome billet accessories slip over the axle adjusting bolts and are secured
using set screws. For all Dyna Glide® models 1991 to present. Sold in Pairs.
| Part # | List Price | Your Price | |
| CC37377 | Custom Axle Adjuster Covers for Dyna Glide® Models Sold in Pairs. | $29.95 | $26.95 |

Custom Axle Adjuster Covers
Two-piece covers are easy to install without any disassembly or re-setting axle
adjustment. Chrome-plated billet aluminum with plate that hides steel end cap and threaded
decorative cap. Cap screws on the end of the adjuster and covers the axle nut and holds
the plate cover in place. Sold in pairs.

Chrome Axle Adjuster End Caps
Add a beautiful chrome-plated highlight to the ends of your swingarm. Die-cast
construction won't distort like the Original Equipment stamped steel plates. Work with
your stock axle carriers and increase the range of adjustment. Fit 4-speed Big Twins from
1973 thru 1986 and Sportster® models from 1979 thru 1996.Sold in Pairs.
| Part # | List Price | Your Price | |
| CC31108 | Chrome Axle Adjuster End Caps Sold in Pairs. | $21.95 | $19.95 |

Chrome Steel Rear Axle Adjusters
Slick styling and steel strength are combined in the unique design of this series
of axle adjusters. Indexed window makes it easy to maintain alignment. Sold in pairs.
| Part # | List Price | Your Price | |
| VT442011 | Chrome Steel Rear Axle Adjusters Fits 1973-1985 FL-FLH, 1979-present XL. | $74.95 | $68.95 |

Doss 'Speed Line' Axle Adjusters
Rick Doss 'Speed Line' accessories add an elegant touch to bikes without being
gaudy, and the new axle adjusters are no exception. The adjuster for Dyna Glide® models
includes the rounded end cap and socket head adjuster bolt and fits all models from 1991
to present. The FXR adjuster includes caps, dual adjuster bolts and replacement adjuster
blocks for all models from 1982 thru 1994.
| Part # | List Price | Your Price | |
| CC31137 | Doss 'Speed Line' Axle Adjusters For all Dyna Glide® models | $24.95 | $21.95 |
| CC31123 | Doss 'Speed Line' Axle Adjusters For all FXR models | $45.95 | $40.95 |

Chrome Axle Adjuster End Caps
Attractive swingarm end caps are made of die-cast aluminum and have a brilliant
chrome-plated finish. All necessary hardware is included and installation is a snap. Sold
in pairs.


Custom Axle Adjusters
Forged steel axle carriers are machined to close tolerances to be a snug fit inside the
swingarm section eliminating the common problem of swingarm distortion when axle nuts are
over tightened. The chrome end caps are made of die-cast aluminum. Sold in pairs.
| Part # | List Price | Your Price | |
| CC31122 | Custom Axle Adjusters, 1980 up FXR models w/ 1-1/2" x 3/4" ID rectangular style swingarm | $41.95 | $37.95 |

Chrome Axle Adjusters for Softail® Models
Adding the small details is often the key to a great-looking bike. A set of these
chrome-plated axle adjusters will add one of those highlights that make your bike stand
out from all the rest. Sold in pairs.
| Part # | List Price | Your Price | |
| CC36901 | Chrome Axle Adjusters for Softail® Models Fit all 5-speed Softail® models from 1986 to present | $34.95 | $31.95 |
Note: Socket head screws in photo are for illustration purposes only and not included.

Axle Spacer Kits
Add a stunning chrome highlight by simply replacing your dull Original Equipment axle
spacers with these beautiful designs from Colony. Available in your choice of smooth or
grooved styles.
Rear Grooved
Smooth (Rear)
Front Grooved
Smooth (Front)

Chrome Rear Axle Adjuster Bolt Cap for Softail® Models
This chrome-plated 6061-T6 billet aluminum cap was designed by Rick Doss and mounts over
the rear axle adjusting bolt. Easily installed with silicone adhesive (included). Fits all
Softail® models from 1987 to present.Sold in Pairs.
| Part # | List Price | Your Price | |
| CC46164 | Chrome Rear Axle Adjuster Bolt Cap for Softail® Models Sold in Pairs. | $28.95 | $25.95 |

Doss 'Speed Line' Rear Axle Spacers or Softail® Models
Chrome-plated steel spacers have decorative machined 'Speed Line'. Fit all 5-speed
Softail® models from 1987 to present. Sold in pairs.
| Part # | List Price | Your Price | |
| CC31136 | Doss 'Speed Line' Rear Axle Spacers For Softail® Models Replace OEMs 47577-86 and 47577-94 | $44.95 | $40.95 |

Chrome Rear Wheel Adjusters
Choose the rear wheel adjuster for your motorcycle from the selection below. Each kit
comes complete and is beautifully chrome-plated. Sold in pairs.
If you don't see it here,
E-mail us.
We haven't had a chance to post it yet.
IMPORTANT:
We at CAS are not a representative of any motorcycle manufacturer and the
parts we sell are not necessarily recommended by any motorcycle manufacturer.
Although our replacement parts are not original factory equipment, our intention
is to provide quality replacement parts that meet or exceed standards set by the
manufacturer.
We are not an authorized Harley® dealer and in no way do we have, or intend to
imply any kind of business relationship with Harley-Davidson Motor Company® .
Our intention is to provide products that can be used on a Harley-Davidson®
motorcycle.
CAS sells officially licensed Harley-Davidson®
products.
However, any products with the trademark, name, word or OEM part number
used in this catalog by CAS is intended to be as a reference only to
the usage of that particular product. None of the parts and accessories in this
catalog were manufactured by or with the permission of the Harley-Davidson®
Motor Co. The words, Electra Glide, Evolution, H-D, Harley, Harley-Davidson, Low
Glide, Road King, Roadster, Softail,Sportster,Sturgis, Super Glide,Low Rider, and
Wide Glide are registered trademarks of Harley-Davidson®,Inc.,Milwaukee
Wisconsin, U.S.A.The words, Duo Glide, Dyna Glide,Fat Boy, Hydra Glide and
Bad Boy are trademarks of Harley-Davidson®,Inc., Milwaukee, Wisconsin,U.S.A.
The following model designations for Harley-Davidson® motorcycles are used in
this catalog for reference only:EL,FL,FLH,FLHR,FLHS,FLHT,FLHTC,FLHTC-I,
FLHTS,Ultra,FLHX,FLST,FLSTC,FLSTF,FLSTN,FLSTS,FLT,FLTC,FLTC Ultra,
FXB,FXD,FXDB,FXDC,FXDG,FXDL,FXDSFXDS-Conv.,FXDWG,FXE, FXEF,
FXLR, FXR, FXRC, FXRD,FXRDG,FXRP,FXRS, FXRSE,FXRS-Conv.,FXRS-SP,
FXRT, FXS, FXSB, FXST, FXSTC, FXSTS,FXSTSB,FXWG, GE,K,KH,WL,WLA,
XL,XLCH,XLCR,XLH,XLH 883, XLH 1100, XLH 1200, XLR, XLS, XLT, XLX,
AND XR1000. All other brand names or trademarks, or registered trademarks
used in this catalog are the property of their respective holders.
Please review our
terms and conditions
page Thank You