 |
 |
 |
 |
 |
|
|
|
|
|
High Quality Parts from CAS4
S
& S CARBURETOR
PARTS, KITS, COMPONENTS
THUNDERJET™ KIT FOR S&S CARBS
| Part # |  Description |
List Price | Your Price |
| DS10070150 | Polished Aluminum Thunderjet™ Kit for S&S Carbs Listed Above | $89.95 | $75.95 |
| DS10070151 | Natural Aluminum Thunderjet™ Kit for S&S Carbs Listed Above | $79.95 | $62.95 |
| DS289298 | Red anodized Thunderjet™ Kit for S&S Carbs Listed Above | $79.95 | $62.95 |
| DS289299 | Black anodized Thunderjet™ Kit for S&S Carbs Listed Above | $79.95 | $62.95 |
| DS289300 | Blue anodized Thunderjet™ Kit for S&S Carbs Listed Above | $79.95 | $62.95 |
 |
 |
| VT350152 | DS10500010 |
S & S CARBURETOR ENRICHMENT
DEVICE
This adjustable enrichener replaces the stock fixed enrichener on all S & S Super
"E" and "G" carburetors. Use this when you replace your
air-cleaner that has the choke attached to the air filter backing plate.
| Part # | Description |
List Price | Your Price |
| VT350152 | Enrichment device for B series carb (will work on Super E & G carbs when changing air cleaners), (DS112084) | $48.95 | $38.95 |
| DS10500010 | Enrichment device for B series carb (will work on Super E & G carbs when changing air cleaners) | $69.95 | $59.95 |
ADJUSTABLE ENRICHENER FOR S & S CARBURETORS
This adjustable enrichener replaces the stock fixed enrichener on all S & S Super
"B" and "D" carburetors. Allows for easier starting and warm up
| Part # | Description |
List Price | Your Price |
| CS040448 | Adjustable Enrichener For S & S Carburetors (CC19501) | $25.95 | $22.95 |
ADJUSTABLE MAIN JET FOR S & S SUPER CARBURETORS
This fully adjustable main jet provides positive and accurate adjustments for improved
performance. Includes a 110 jet specially designed for use with the adjustable needle.
Fits into the existing float bowl drain plug hole located below the main jet.
| Part # | Description |
List Price | Your Price |
| CS040447 | Adjustable Main Jet Fits S & S Super "B" and "D" carbs. (CC19499) | $25.95 | $22.95 |
| Part # | Description |
List Price | Your Price |
| DS160491 | 1/4" Insulator block with O-ring Super E | $22.95 | $18.95 |
| DS160492 | 1/4" Insulator block with O-ring Super G | $22.95 | $18.95 |
| DS160057 | 1" Spacer block Super E | $32.95 | $29.95 |
| DS160357 | 1" Spacer block Super G | $38.95 | $34.95 |
'SYSTEM II' TURBULATORS
Creates a high-speed vortex air flow in the incoming fuel-air mixture, improving
performance and mileage. Installs between manifold and carb.
| Part # | Description |
List Price | Your Price |
| CC17355 | 'System II' Turbulators For stock 38mm manifolds for Keihin and Bendix carbs | $29.95 | $25.95 |
| CC17356 | 'System II' Turbulators For S&S Shorty E and B, Mikuni HS40 and Screaming' Eagle' 40mm carbs and manifolds | $29.95 | $25.95 |
| CC17357 | 'System II' Turbulators For all Evolution® Big Twin and Sportster® models with CV carbs | $29.95 | $25.95 |
| CC17358 | 'System II' Turbulators For S&S Super G carbs and manifolds | $29.95 | $25.95 |
| CC17359 | 'System II' Turbulators For 1 7/8" S.U. 4-bolt upswept and straight manifolds | $29.95 | $25.95 |
'SYSTEM II' ATOMIZERS
Easily installed between the carburetor and manifold with amazing
results.Produces a better air/fuel mixture and according to the manufacture, gives you
increased fuel mileage, kinetic horsepower gains, and eliminates most back-pressure and
pre-ignition problems.
| Part # | Description |
List Price | Your Price |
| VT350093 | 'System II' Atomizers, 30 mm models, MikuniHS40 and Screaming' Eagle" carburetors and 38mm Bendix or Keihin 'butterfly' carbs | $25.00 | $23.00 |
| VT350092 | 'System II' Atomizers, S&S, Mikuni, Screaming Eagle, with 40-42 mm | $25.00 | $23.00 |
| VT350091 | 'System II' Atomizers For all models with S.U. carburetors with up swept manifolds, 4 bolt | $25.00 | $23.00 |
| VT359253 | 'System II' Atomizers For all models with S.U. carburetors, straight manifold, 4 bolt | $25.00 | $23.00 |
| DS289106 | 'System II' Atomizers For all models with Keihin CV (constant velocity) carbs | $25.00 | $23.00 |
MAIN JETS FOR s & s
CARBURETORS
These main jets are used when installing new exhaust systems or just for better
performance and mileage. Controls mixture at full throttle. Jet sizes are available in
increments of .002 and ranges from .040 to .104. Sold each.
| Part # | Description |
ALL JETS $10.00 EACH |
| CS040270 |
.040 main jet |
|
| CS040271 | .042 main jet | |
| CS040272 | .044 main jet | |
| CS040273 | .046 main jet | |
| CS040274 | .048 main jet | |
| CS040275 | .050 main jet | |
| CS040276 | .052 main jet | |
| CS040277 | .054 main jet | |
| CS040278 | .056 main jet | |
| CS040279 | .058 main jet | |
| CS040280 | .060 main jet | |
| CS040281 | .062 main jet | |
| CS040282 | .064 main jet | |
| CS040283 | .066 main jet | |
| CS040284 | .068 main jet | |
| CS040285 | .070 main jet | |
| CS040286 | .072 main jet | |
| CS040287 | .074 main jet | |
| CS040288 | .076 main jet | |
| CS040289 | .078 main jet | |
| CS040290 | .080 main jet | |
| CS040291 | .082 main jet | |
| CS040292 | .084 main jet | |
| CS040293 | .086 main jet | |
| CS040294 | .088 main jet | |
| CS040295 | .090 main jet | |
| CS040296 | .092 main jet | |
| CS040297 | .094 main jet | |
| CS040298 | .096 main jet | |
| CS040299 | .098 main jet | |
| CS040300 | .100 main jet | |
| CS040301 | .102 main jet | |
| CS040302 | .104 main jet |
INTERMEDIATE JETS FOR s & S CARBURETORS
Fits all S & S super carburetors. Controls mixture at 1/2 to 3/4 throttle. Sold each.
| Part # | Description |
ALL JETS $10.00 EACH |
| CS040260 | .025 -#1 Intermediate Jet | |
| CS040261 | .028-#2 Intermediate Jet | |
| CS040262 | .0295 - #2-1/2 Intermediate Jet | |
| CS040263 | .031 -#3 Intermediate Jet | |
| CS040267 | .032-#3-1/2 Intermediate Jet | |
| CS040264 | .033- #4 Intermediate Jet | |
| CS040265 | .036-#5 Intermediate Jet | |
| CS040266 | .040-#6 Intermediate Jet |
 |
 |
| MASTER KIT | BODY KIT |
MASTER REBUILD KIT FOR S & S SUPER "E"OR
"G" CARBURETORS
Available for 1-7/8" Super "E" models or 2-1/16" Super "G"
carburetors in two versions - complete (master) or body only.
Body Kits
Includes throttle shaft, throttle plate, throttle return spring, pump actuator spring,
O-ring, bowl gasket, injector nozzle O-ring, bellows seal, 2 throttle plate screws and
washers.
| Part # | Description |
List Price | Your Price |
| CS040570 | Body Kit Fits 1 -7/8" Super "E" (VT359185) | $58.95 | $48.95 |
| CS040571 | Body Kit Fits 2-1/16" Super "G" | $58.95 | $48.95 |
Master Kits
Includes the contents of the body kits above plus: accelerator pump, idle mixture screw,
idle mixture screw spring, idle speed screw, pump adjuster screw, Idle speed/pump
adjuster screw springs, plunger spring, float pin, bowl screws, pump cap screws,
cable clamp/float pin screws, bowl plug O-ring and needle and seat assembly.
| Part # | Description |
List Price | Your Price |
| CS040572 | Master Kit Fits 1 -7/8" Super "E" , (DS112923) | $91.95 | $79.95 |
| CS040573 | Master Kit Fits 2-1/16" Super "G", (DS112924) | $95.95 | $82.95 |
 |
 |
|
|
|
MASTER REBUILD KIT FOR s & s
SUPER "A & B" CARBURETORS
Fits all S & S "A" or "B" model, 1 -7/8" super carburetors.
Available complete (master) or body only.
| Part # | Description |
List Price | Your Price |
| VT350199 | Body kit. For s & s Super " B" Carburetors Includes throttle shaft,throttle plate, throttle return spring,O-ring, bowl gasket, 2 throttle plate screws and 2 throttle shaft bushings. (CS260089) | $59.95 | $49.95 |
| VT350204 | Super " B" Master Kit - Type "
A " Wire Style Float. For s & s Super " B" Carburetors 1983, up Includes the contents of above plus: idle mixture screw,idle mixture screw spring, early and late style needles, needle seat, float retaining pin, 4 bowl screws, 3 air cleaner backing plate screws, 3 air cleaner cover screws and 4 screws for throttle arm |
$82.95 | $72.95 |
| VT359142 | Super " B" Master Kit - Type
" B " Fork Style Float. For s & s Super " B" Carburetors Pre-1983 Includes the contents of above plus: idle mixture screw,idle mixture screw spring, early and late style needles, needle seat, float retaining pin, 4 bowl screws, 3 air cleaner backing plate screws, 3 air cleaner cover screws and 4 screws for throttle arm |
$82.95 | $72.95 |
S & S "E/G" REPLACEMENT PARTS
Individual replacement parts for popular S & S "E/G" model
carburetors. Refer to S & S instruction sheet. All items sold each.
| Part # | Description |
List Price | Your Price |
| CC645820 | Gasket, float bowl (S & S #386) - 10 PACK ONLY | $19.95 | $18.45 |
| CS040575 | O-ring, accelerator pump cap (S&S #371) | $1.95 | $1.45 |
| CS040576 | Check ball, accelerator pump (S&S #272) | $1.95 | $1.45 |
| CS040577 | Diaphragm, accelerator pump (S&S #282) | $17.95 | $15.95 |
| CS040578 | Seat, float needle (S&S #465) | $11.95 | $10.95 |
| CS040579 | Needle, float bowl (S&S #195) | $21.95 | $19.95 |
| CS040580 | O-ring, carb-to-manifold ("E" models only,S&S #387) | $2.95 | $1.95 |
| CS040581 | O-ring, carb-to-manifold ("G" models only, S&S #356) | $2.95 | $1.95 |
| CS040582 | O-ring, injector nozzle (S&S #287) | $1.95 | $1.45 |
| CS040583 | O-ring, float needle seat (S&S #345) | $2.95 | $2.25 |
| Part # | Description |
List Price | Your Price |
| DS289113 | Accelerator pump rebuild kit for E & G (diaphragm, spring, check balls and springs, pushrod and required hardware) | $31.95 | $26.95 |
If you don't see it here,
E-mail us.
We haven't had a chance to post it yet.
IMPORTANT:
We at CAS are not a representative of any motorcycle manufacturer and the
parts we sell are not necessarily recommended by any motorcycle manufacturer.
Although our replacement parts are not original factory equipment, our intention
is to provide quality replacement parts that meet or exceed standards set by the
manufacturer.
We are not an authorized Harley® dealer and in no way do we have, or intend to
imply any kind of business relationship with Harley-Davidson Motor Company® .
Our intention is to provide products that can be used on a Harley-Davidson®
motorcycle.
CAS sells officially licensed Harley-Davidson® products.
However, any products with the trademark, name, word or OEM part number
used in this catalog by CAS is intended to be as a reference only to
the usage of that particular product. None of the parts and accessories in this
catalog were manufactured by or with the permission of the Harley-Davidson®
Motor Co. The words, TC88, Electra Glide, Evolution, H-D, Harley, Harley-Davidson, Low
Glide, Road King, Roadster, Softail, Sportster, Sturgis, Super Glide, Low Rider,
and
Wide Glide are registered trademarks of Harley-Davidson® Inc., Milwaukee
Wisconsin, U.S.A. The words, Duo Glide, Dyna Glide, Fat Boy, Hydra Glide and
Bad Boy are trademarks of Harley-Davidson®, Inc., Milwaukee, Wisconsin, U.S.A.
The following model designations for Harley-Davidson® motorcycles are used in
this catalog for reference only: EL, FL, FLH, FLHR, FLHS, FLHT, FLHTC, FLHTC-I,
FLHTS, Ultra, FLHX, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLT, FLTC, FLTC Ultra,
FXB, FXD, FXDB, FXDC, FXDG, FXDL, FXDS, FXDS-Conv., FXDWG, FXE, FXEF,
FXLR, FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRSE, FXRS-Conv., FXRS-SP,
FXRT, FXS, FXSB, FXST, FXSTC, FXSTS,FXSTSB, FXWG, GE, K, KH, WL, WLA,
XL, XLCH, XLCR, XLH, XLH 883, XLH 1100, XLH 1200, XLR, XLS, XLT, XLX and
XR1000. Buell, S1, S2, M2, Cyclone, Lighting, Thunderbolt, X1. All other brand names
or trademarks, or registered trademarks used in this catalog are the property of their
respective holders.
Please review our terms
and conditions page Thank You
